On this page you’ll find the complete step-by-step plans for a DIY phone running belt
Things You Will Need!
- A Stretchy Athletic Top
- A Pair Of Scissors
- Some Fabric Glue
- Your Mobile Phone!
Instructions
#1: Use your phone to measure the fit and hold
Place your phone landscape at the bottom of the top and then fold up. You should end up with something a little like the pictures above.
#2. Cut the fabric 2 inches above the hold
Once you have your phone in place measure 2 inches above the fold and cut all the way to the other side following the scattered lines in the picture above.
#3. Fold in a third, then fold again
With the bottom half of the top fold it in a third then fold one more time. Essentially it will be the same top just a third of the size.
#4. Glue across the top
The next step you will need to grab your fabric glue and glue from one side to the other inside the first layer.
#5. Let it dry for around 2 hours
Once the glue has dried you are ready to go with your new DIY phone running belt!
You can watch the step by step video instructions here…
If you like this DIY tutorial please share it with your friends and family on social media. It helps me keep the lights on here at RunningProbe.com!
Leave a Reply